Physical properties
Physical state: Viscous liquid
Color: Pale yellow
Melting point: -13 °C (8.6 °F)
Chemical properties
Boiling point: 146 °C (295 °F)
Solubility in water: Insoluble
Density: 1.115 g/cm3; 20 °C
Flammability limit | Threshold limit value | ||
---|---|---|---|
LFL | UFL | TLV-TWA | TLV-STEL |
1.1% | 6.1% | 50 ppm | 100 ppm |
Unsaturated Polyester Resin: General Description And Use
USE
- Composite materials
- Wood paints
- Flat laminated panels, corrugated panels, ribbed panels
- Gel coat for boats, automotive and bathroom fixtures
- Coloring pastes, fillers, stucco, putties and chemical anchorings
- Self-extinguishing composite materials
- Quartz, marble and artificial cement
- Boat hulls, lorry cabs, roofing plans, chemical plants and several seaplane floats and similar mouldings
General description
Polyesters are one of the most versatile synthetic copolymers. They are heterochain macromolecules that possess carboxylate ester groups as an integral component of their polymer backbones. Unsaturated polyester resins are condensation products of unsaturated acids or anhydrides and diols with/without diacids. The unsaturation present in this type of polyester provides a site for subsequent cross-linking. These resins are compounded with varied fillers, reinforcements and cured by using free radical initiators to yield thermoset articles having a wide range of chemical and mechanical properties depending upon the choice of diacids, diols, cross-linking agents, initiators, and other additives.
Unsaturated Polyester Resin: Warnings and caution
GHS hazard statements
H304 – May be fatal if swallowed and enters the airways.
H332 – Harmful if inhaled.
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
H355 – May cause respiratory irritation.
H372 – Causes damage to organs through prolonged or repeated exposure
H401: Toxic to aquatic life
GHS precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
P233 – Keep the container tightly closed.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust/fume/gas/mist/vapor/spray.
P264 – Wash hands thoroughly after handling.
P271 -Use only outdoors or in a well-ventilated area.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 – IF INHALED : Remove the victim to fresh air and keep at rest in a comfortable position for breathing.
P337+P313 – If eye irritation persists: Get medical advice/attention.